NEW TITLE HERE
Check the thickness of applied powder coatings with the DeFelsko Powder Comb before baking to ensure the correct application the first time for your required coating thickness. Avoid costly stripping and re-coating with its associated potential adhesion problems, or waste of material from applying excess powder.
Easy to use, the DeFelsko Powder Comb is pushed perpendicularly into the dry power until the side stand-offs sit on the substrate. Drag the Powder Comb along the surface of the coated part for at least 1/2 inch. Remove the Powder Comb from the coated surface and examining the marks left in the powder.
Powder thickness is between the highest-numbered tooth which made a mark and has powder clinging to it, and the next-highest tooth which left no mark and has no powder clinging to it.
Observe the image to the left. The 3 and 6 mil teeth both make lines and have powder clinging to them, but the 9 mil tooth does not. The uncured powder thickness is therefore between 6 and 9 mils.
Please review the following chart to determine the correct Powder Comb model(s) for your particular job:
Model | Height Tooth 1 | Height Tooth 2 | Height Tooth 3 | Height Tooth 4 |
Model 1 (mils) | 3 | 6 | 9 | 12 |
Model 2 (mils) | 10 | 15 | 20 | 25 |
Model 3 (mils) | 20 | 30 | 40 | 50 |
Model 4 (µm) | 75 | 150 | 225 | 300 |
Model 5 (µm) | 250 | 375 | 500 | 625 |
Model 6 (µm) | 500 | 750 | 1000 | 1250 |
Call us in Eastern Canada at (905) 688-5800 or Western Canada at (587) 758-8367 to find out more about the DeFelsko Powder Checker and other powder coating quality assurance equipment.